Founded in 1994, China JingPin machine Co., Ltd. is briar pipe manufacturer and supplier. Our custom briar pipes meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

The Dr Plumb 6mm filtered range are a more traditional shaped and sized Briar pipe, which are designed for use with the thinner, disposable, 6mm absorbent filters. The length of the stem and good thick briar wall helps prevent over heating therefore providing a cooler more enjoyable smoke, which isn't found with smaller pipes. Length: 5 1/2". Weight: 45 Grams. Stem: Traditional tapered Lucite. Bowl Shape: Standard Billiard. The Dr Plumbs 6mm Pipes are designed for use with the Dr Plumbs 6mm filters, which built up of an array of absorbent flaps. These spiral through the filter forcing the smoke to spiral touching as much surface area as possible to absorb the maximum amount of tar without restricting the draw. No mess no fuss, simply throw the filter in the bin when it turns a dark brown colour. The pipes have a standard 6mm bore so can be used with any brand of 6mm filter if preferred. Alternatively the filter can be removed all together for smokers who prefer a totally un-restricted full on smoke.

These handsome briars are carved from the finest high grade briar roots from orsica and Greece. Each high grade block of briar is selected by hand for the specific pipe that it is inntended for. It is then cut, shaped and finished by experienced craftsmen. Stanwell Pipes are known the world over for their unique design and superior smoking qualities. These pipes are an excellent buy and each one is a good smoker.Here you will find the finest and most beautiful tobacco smoking instruments that I am capable of producing. I use the best materials available to me, and techniques that few will spend their time on, to make a product that is intended to provide decades of pleasure for the serious connoisseur. Only half fill the bowl for the first few smokes and then alternate between full and half full bowls for the next three or four. This allows the heel of the bowl and the bowl itself to develop an even, protective carbon coating which will extend the life of your pipe. Over time, carbon will build up on the inside of the bowl.