Founded in 1994, China JingPin machine Co., Ltd. is butterfly valve manufacturer and supplier. Our custom butterfly valves meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

Butterfly Valve, Size 1/2 In, NPT Connection, Rated For 175 PSI, Full Port, Material of Construction Bronze, Viton Seats, Stem Material Stainless Steel, Lever Handle, Temp Range 30 To 275 F, Overall Length 1.88 In. For use with temperatures up to 210 degrees Fahrenheit. Teflon seals, plated steel handle with vinyl grip. Heavy plated T-handle also included. Quarter turn operation. For underground use as astop and drain valve or on air lines to relieve pressure from an air tool. Non pressure side of valve is drained automatically when valve is in closed position. Non-rising flow control handle adjusts water flow as needed. Accepts latching solenoid for use with Rain Bird battery-operated controllers.

Watts Brass & Tubular #P-564 1/2x1/2 Butterfly Valve. 1/2" Barb x 1/2" Butterfly Valve, With Drain Brass Insert Crimp Ring Fittings, Quick & Reliable Connections, Immediate Pressure Testing, Connections Are NSF Listed Brass Inserts With Pure Copper Fastening Rings, When Crimped With Simple Hand Tool Connections Form A Fast, Reliable & Permanent Seal, For Use Crossed Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, No Need To Wait For Hours For Connection To Set & Seal. Size: 1 1/2 inch Globe and angle configuration for flexibility in design and installation. Double-filtered pilot flow to resist debris and clogging of solenoid ports.