Founded in 1994, China JingPin machine Co., Ltd. is door fitting manufacturer and supplier. Our custom door fittings meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

Combining product excellence with ease of fabrication , the Triad 3D hinge allows 3 - way adjustment on site and after installation. Simple allen key adjustment enables door/structuure movement to be compensated. 2 Triad 3D hinges can bear loads of upto 150kg. M T Hinge is 85mm and E T Hinge is 95mm wide. Choice of size depends upon location of reinforcement and profile make. Conventional FERCO door bolt. 70mm Centres ( Measured from the centre of the square used by handle spindle to the centre of the circle of the profile cylinder ). Available with 2 or 4 rollers. top and bottom shoot bolts can be added to increase security. Available in single , double , knob and thumb turn
Measured from the end of the cylinder to the centre of the screw hole and from the centre of the screw hole to the other end of the cylinder. Size range from 30/30 to 40/60 in 5mm increments Finishes :- Nickel plated , Brass , brassed , bright nickel. Standard , Anti - pick , Anti - drill versions
Master Keying , keyed alike and key blanks available.

Lever / Lever furniture for timber doors. Available with conventional key slot or 92mm centre profile cylinder cut out. Also available without a keyway for use with French doors. Can be used with multipoint locks. Finishes available :- Brassed , Chrome , Black and White. Available in single , double , knob and thumb turn. Measured from the end of the cylinder to the centre of the screw hole and from the centre of the screw hole to the other end of the cylinder. Size range from 30/30 to 40/60 in 5mm increments. Finishes :- Nickel plated , Brass , brassed , bright nickel. Standard , Anti - pick , Anti - drill versions. Master Keying , keyed alike and key blanks available. Universally sprung extruded aluminium handle sets. non - handed. 92mm and 47.6mm centres. Silver anodised , Gold anodised , White and Black finishes. Screw points are above and below lock cases. In majority of applications existing screw holes are covered by the backplate.