Founded in 1994, China JingPin machine Co., Ltd. is gate valve manufacturer and supplier. Our custom gate valves meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

1-1/2" slip x slip fittings. Gate Valves, referred to as knife valves by some, are easier to use than a ball valve for fully opened or closed operation. They are not used for regulating flow. For water, oil or gas lines 200 PSI, for steam 125 PSI For commercial & residential Non-rising steam Solid wedge bronze disc Solder ends Meets MSS SP-80 spec. One year limited warranty Bulk 1/2" Copper Sweat. Size: 2 - 20". Complies with AWWA C509, flanges comply with ANSI B16.1 (125LB)
Fully encapsulated in EPDM rubber to ensure drop tight sealing. Top casting incorporates dual O-ring seals and wiper ring for long operation life. Back seal facility to allow for replacement of seals under full operating pressure.

PVC construction. Gray color body with red handle. EPDM O'rings. Complies with all applicable ASTM and ANSI standards. 125 PSI water, oil or air at temperatures up to 210 degrees Fahrenheit. Solid wedge disc. Full flow, exclusive double "O''-ring packing. Non-rising stem. Heavy cast iron handle. Gate valves are designed for use in a fully open or closed position. 3/4" Gray Schedule 80 PVC Threaded Gate Valve, Screw Over Bonnet With Oversized Non-Rising Stem, Heavy Duty Polypropylene Gate, Handle & EPDM O-Rings, NSF Approved, Complies With ANSI B2.1, Rated At 150 PSI, Fits Both Schedule 40 & Schedule 80 PVC, Not For Use With Compressed Air.