Founded in 1994, China JingPin machine Co., Ltd. is hose clip manufacturer and supplier. Our custom hose clips meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

VIAIR Buddy Helper 35 FT. Coil Hose w/ Clip On Chuck An exclusive from VIAIR, this 200 phi rated 35 ft. coil hose will even reach all four tires on your buddy's vehicle parked alongside. Just the right length avoids overstretching the coil hose and without the clumsiness of a 50 ft. coil. This hose comes with swivel tire chuck and 1/4 in. male swivel fitting. Warranty: 1 Year Weight: 4 lbs. According to the manufacturer, this Part # fits all vehicles. Allows Floodchek hoses to be used in tighter spaces to prevent washing machine hose leaks. Each gooseneck has a swivel connection for the water spigot or washer hose connector. The length of each gooseneck from the top of the female hose connector is 1.5 inches on the outside. The length of the remainder including the male connector is 1.75 inches on the outside. Depending upon how you install it, the angle is either a 45 degree angle or a 135 degree angle i.e it would bisect or divide the second quadrant of a circle in half.

Fast inflation and deflation of inflatable products , For use with Coleman Double Lock Valve Boston Valve and Pinch Valve , Coleman Double Lock Value and Pinch Valve adapters included , Battery clips for direct use with marine and automotive batteries
Fast inflation and deflation of inflatable products
For use with Coleman Double Lock Valve Boston Valve and Pinch Valve
Coleman Double Lock Value and Pinch Valve adapters included
Battery clips for direct use with marine and automotive batteries
It does not swivel but holds a tight seal.Traditional dryer hose connector clamps work with screw tension alone which becomes loose over time. With the Dock Lock Dryer Hose Connector in place the dryer hose stays securely connected until you disconnect it for cleaning. Simply mount the Dock on the wall and attach the Lock onto the dryer hose. Join the Dock ?N Lock together and twist slightly to securely lock in place. A slight twist in opposite direction separates the two for cleaning.