Hydraulic directional control valve. 25 GPM, 3000 PSI. 4-way, 2-position. Spring offset. Hand-lever operated. This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-offset valve, it will remain in its home position until shifted and held, returning to home when the lever is released. In-line mount. 17.1 GPM flow. 3000 PSI max. pressure rating. 1/2in. NPT female ports Free flow one direction, blocked flow opposite direction. This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. Its molded coils are moisture and dirt resistant.

Hydraulic Directional Control Valve. 16.8 GPM, 4500 PSI 4-Way, 2-Position. Spring Offset. Closed Crossover Spool Type. 120 Volt AC. This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. Additional advantages include superior life due to hydraulic fluid lubrication of the armature, easy coil replacement without opening the hydraulic system, and ease of valve assembly.