The DM7 Continuous Flow Plug replaces the stock on/off plug in the front of the DM7 eliminating leaking and increasing the flow capacity of the DM7. The DM7 CFP (Continuous Flow Plug) comes with o-rings and is ready to install. The shut-off exit spout valve stops the flow of water when tube is disconnected. Take out a filled reservoir faster with no leakage. The quick release connector piece will allow you to disconnect at the push of a button. Design and manufacture: ANSI B16.34, API 6D, API 599. Fire safe: API 607, BS 6755, API 6FA, ISO 10497. Corrosion resisting: NACE - MR - 0175. Face to face dimension: short, regular, venturi pattern: ANSI B16.10. End flange dimensions: ANSI B16.5. End connection: B. W. ends to ANSI B16.25. Threaded ends to ANSI B2.1, API 5B. Socket welded ends to ANSI B16.11. Operation: lever, electric, worm gear, or pneumatic actuator.

Upgrade your drink system for easier filling. The quick release connector piece will allow you to disconnect your drink tube from the reservoir at the push of a button. The shut-off exit spout valve stops the flow of water out of the reservoir when the drink tube is disconnected. You can leave your tube in your pack and take out a filled reservoir faster with no leakage. Replaceable ball-valve style seats which take the wear off of the plug, and give the added benefit of a plug valve with lower turning torques than comparable valves, and replaceable without ever taking the valve out of the pipeline. Simple valve and packing adjustment using just a pair of pliers.. no special tools or training required. Thicker plastic liners, 0.125 inches minimum. Longer service life. Wide range of actuation options available.