Founded in 1994, China JingPin machine Co., Ltd. is tube bender manufacturer and supplier. Our custom tube bending meet ANSI, API, DIN, BS, JIS and GB Standard. Our products are mainly made by these materials such as WCB, WC1, WC6, WC9, ZGCr5Mo, ZG15Cr1Mo1V, CF8, CF8M, CF3, CF3M, 12CrMoV, ZG1Cr18Ni9Ti, and ZG1Cr18Ni12Mo2Ti, etc. and passed the AZ certification of State Technology Supervision Bureau, and CE certification of EEC, Pressure Equipment PED, and API certification of the USA.

Compact Hand Pipe Bender. 6 ROUND Pipe Dies: 3/8", 1/2", 9/16", 5/8", 3/4" & 7/8". 2 SQUARE Pipe Dies: 3/4" & 1". Pipe Thickness: 0.8-1.2mm. Included: Carrying Case. Easy one hand bending of 1/4" to 7/8" soft copper, aluminum and light wall hydraulic tubing. Hard copper must be annealed before bending.Quick change bending mandrels and shoes Trouble free ratchet mechanism Index marks to locate bends Optional Reverse Bending Kit for bending tubing from the outside of the bend. Complete swing bender kit includes all items shown to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing per case plus a small cutter for 1/8" to 1-1/8" O.D. tubing and a tube reamer. TD Industrial 19 Piece Compact Hand Pipe Bender with PVC case. This pipe bender is suitable for round pipe from 3/8(in) to 7/8(in) and square pipe 3/4(in) & 1(in). Easy and safe; bend a pipe by just pulling the handle.

Description: Lever Type Tube Bender. Tube Outside Diameter: 1/4. Makes bends accurately 1/32". Handle has "gain mark" for accurate tube measurement. Handles are wide apart when completing a full 180 bend - no knuckles cracking. Bends Virtually All Types Of Pipe Except Conduit. 6 Cast Iron Shoes For 1/2"-2" Diameter Pipe. Top Rollers Adjust For Degree Of Bend. Includes A 12 Ton Air/manual Hydraulic Bottle Jack And 6 Bending Forms. Height and width of the item is described in picture icon one. 1706 Potrero Ave. S. El Monte, CA. 91733. Easy to use tube bender Open side design slips over tube at any point. Makes smooth short radius bends up to 90 degrees with minimum effort. Calibrated to show angle of bend. Easy 90 degree start requires much less effort to make fast and accurate bends. Bends 3/16, 1/4, 5/16 and 3/8 (4, 6, and 8mm) O.D.